Hey, RoadStar Guy! Locking Down a Har... Log Out | Topics | Search
Moderators | Edit Profile

Ibanez Collectors World » Cool Contemporary Electrics (1980s and Later) » Hey, RoadStar Guy! Locking Down a Hard Rocker Bridge? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Rs335
Username: Rs335

Registered: 02-2006
Posted on Tuesday, February 21, 2006 - 11:33 am:   

I recently picked up an RS335 that looks just like this:

http://www.ibanezregister.com/images/images-roadstar/rs335/rs335bk-83.jpg

I love it - it plays and sounds great, but I really don't use the vibrato arm, so I screwed the studs down all the way and put on 5 springs so the whole thing is sitting flush to the body. It's definitely stable but now I have to raise the saddles really high to get the action up off the frets and I'm worried this is putting stress on the little screws in the saddles since they are extended out so far. The only thing I can see to do is raise the front of the bridge (the studs) back up so I can lower the saddles, but then only the back of the bridge will touch the body and I'm concerned this will decrease sustain. Anybody have any suggestions on this?
Top of pagePrevious messageNext messageBottom of page Link to this message

Rs335
Username: Rs335

Registered: 02-2006
Posted on Tuesday, February 21, 2006 - 11:37 am:   

Sorry about the title - I meant Mr. Roadstar...
Top of pagePrevious messageNext messageBottom of page Link to this message

Mrmike
Username: Mrmike

Registered: 01-2006
Posted on Tuesday, February 21, 2006 - 6:03 pm:   

Hi! I can help! I own a music store and do gtr repair for a living. I do this repair all the time for my customers. You need to place a small block of wood between the trem block and the body inside the trem cavity on the spring side.Get your gtr playing how you like it with the trem 'floating',make sure the top of the trem is level with the top of the body.Now size the thickness of your wood so the trem block comes to rest on the wood and your trem is still level.
It might take a few trys to get it just right.
1/4 to 3/8 thickness is a good place to start.
You don't lose sustain because the trem still making contact the body;even more so with the springs really tight! You can glue the wood block to the body and pop it off if you want! I would charge about 20-30 bucks for this job at my shop. Good Luck!
Top of pagePrevious messageNext messageBottom of page Link to this message

Mr_roadstar
Username: Mr_roadstar

Registered: 06-2002
Posted on Wednesday, February 22, 2006 - 1:00 am:   

What he said...

Steve
Top of pagePrevious messageNext messageBottom of page Link to this message

Rs335
Username: Rs335

Registered: 02-2006
Posted on Wednesday, February 22, 2006 - 4:30 pm:   

Thanks for the tip!

Max S.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:


Thank you for supporting Ibanez Collectors Forum. Please help your favorite Ibanez guitar site as we endeavor to bring you the latest information about Ibanez custom vintage electric and acoustic guitars. Here you can discuss ibanez, guitars, basses, acoustics, acoustic, mandolins, electric guitar, electric bass, amplifiers, effect pedals, tuners, picks, pickups.