Upgrading an RX240

Log Out | Topics | Search Moderators | Edit Profile

Author Message   Mrdna1 Username: Mrdna1 Registered: 03-2006 Posted on Friday, March 31, 2006 - 5:23 pm:    I have an old RX240 which is in dire need of a new neck (the current one is impossible to intonate since the nut slot was cut a little crooked, and the upper frets are a bit shaky). I want to get a Warmoth replacement neck, but I'm not sure if it will fit correctly ... a friend gave me the neck from his old RX20, and that doesn't fit right as the mounting holes on that one were drilled lower than the ones on my 240's stock neck. Also, what size holes do the 2MH1CG433G tuners require for mounting? I replaced the stock machines on my guitar with a set of those (or at least I think I did, they look exactly like the 2MH1CG433G picture on Ibanez's site only with gold buttons instead of pearl) and plan on keeping them in whatever new neck I procure. (here's hoping the above makes sense, heh)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Enter Item number: Username: Posting Information: This is a private posting area. Only registered users and moderators may post messages here. Password: Options: Enable HTML code in message Automatically activate URLs in message Action: