Will a RX neck fit a GRX body?

Log Out | Topics | Search Moderators | Edit Profile

Author Message   Guitar2mw (Guitar2mw) Posted on Thursday, February 05, 2004 - 12:41 am:    Just wondering if a RX model neck will fit the newer GRX body. They seem to have the same neck joint (neck plate, 4 bolt), but I'm not sure if the measurements would be right.   Mr_Roadstar (Mr_Roadstar) Posted on Thursday, February 05, 2004 - 3:44 am:    Should be a direct replacement. Can't swear to it in court, though. Cheers Steve   Guitar2mw (Guitar2mw) Posted on Friday, February 06, 2004 - 12:54 am:    In that case, do you know where I can get one?   Captainibanez (Captainibanez) Posted on Friday, February 06, 2004 - 8:48 am:    Hi Guitar2mw, tell me where you are in this crazy world and I will try and point you in the right direction. The policy is that the damaged neck that you have is a straight swap and you won't get the old neck back and it must be fitted by your local Ibanez distributor's service department or a authorised Ibanez repairer assigned by your countries Ibanez distributor. Also to peep's, please don't annoy your local Ibanez distributor for a neck for your home made project. Ibanez necks are for Ibanez guitars only......I hope you will all understand this policy. Captain Ibanez   Guitar2mw (Guitar2mw) Posted on Thursday, February 12, 2004 - 11:46 am:    I was actually hoping to just find a used one. The one that I have is fine, but I was just looking for something a little thinner with the same neck joint as my present neck (haven't found an RG model that will work). I know all about Ibanez's policy with replacing necks (which I think is complete bullshit, but that's just my opinion). Just wondering if anyone had one to sell.   Captainibanez (Captainibanez) Posted on Tuesday, February 17, 2004 - 8:34 pm:    I know policies can suck sometimes, but it's designed to stop gross acts of buffoonerism by loosers,who what to attempt to fit Ibanez necks to bodgie home made shitbox project guitars etc and say look at my custom Ibanez..... I suffer these phone calls nearly everyday, and after all these years I'm ready to hunt down these weeners with my KryptonPlasma rifle ! RX to GRX is a straight fit for a neck, but the heel on a RG is different to the RX, but if you happen to find a S/Hand neck, be nice to your local guitar luthier and he may be able to re-shape it to fit. All jokes aside, this is why Ibanez have guidelines that distributors have to follow. Captain Ibanez

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Enter Item number: Username: Posting Information: This is a private posting area. Only registered users and moderators may post messages here. Password: Options: Enable HTML code in message Automatically activate URLs in message Action: