Tone control for 2001 AS 80 Log Out | Topics | Search
Moderators | Edit Profile

Ibanez Collectors World » Jim Donahue Answers Your Questions. » Tone control for 2001 AS 80 « Previous Next »

Author Message
Ratfinks3
Username: Ratfinks3

Registered: 11-2004
Posted on Thursday, April 14, 2005 - 1:13 am:   

I have a 2001 AS 80 NOS I discovered in a warehouse music store in Florida. Everything worked great, then the tone pots quit working. (no change in tone while adjusting the pot). What should I check? Control switch for pick ups? input jack on guitar? caps on the pots? It was nice to find a brand new AS80 anyway. I bought the vintage burst and there is a sunburst still for sale. It was a little high priced ($718.00 with SKB hard case and shipping) but where else can you buy a fantastic Ibanez that's been out of production. The quality in the wood and craftmanship in these two instruments was unreal. I don't know if someone was holding on to them for that reason or what. They have an aged tint to the clear and used tiger stripped wood of some type. It looks like the top, back, and sides are solid with no lamination. The pick ups don't say 58 or super 58 on them. They do have wax covering the back. It's made in Korea. What is the normal make up of woods in an AS80? Anyway enough on the stoke with this axe, can you help me with the pots? Thanks, Mike
Johns
Username: Johns

Registered: 02-2001
Posted on Thursday, April 14, 2005 - 10:56 am:   

Ratfinks3:

Can't answer the pots question, but others around here are experts in this area and should have you covered on this issue.

The catalog says that the 2001 AS80 has maple top, back and sides. The pickups are Super 58s.

Are you saying that there were two 2001 AS80s in different finishes? The catalog only shows one: VB.
Ratfinks3
Username: Ratfinks3

Registered: 11-2004
Posted on Thursday, April 14, 2005 - 12:14 pm:   

Yep, two 2001 AS 80's. Vintageburst and Sunburst. Everything else is the same. Perhaps they are 2002's but I thought the AS 80 was out of production by then? My S# is 01020121 I'm calling the place back to check the S numbers on the Sunburst. They may be adjacent numbers and that is why some sales person was hiding them for their stash at a later time. Do you think they would be worth collecting being production brothers? What would the value be? I'd have about 1450.00 in the both of them with shipping and SKB cases.
Spiro
Username: Spiro

Registered: 02-2001
Posted on Thursday, April 14, 2005 - 6:30 pm:   

Hey Ratfinks

The problem with your tone pot is more likely the fact that the carbon in the post has a wear mark through it.. I suggest you replace all the pots in the guitar with some japanese ones. ( dimarzios or CTS pots have a different spline knurling and wont take the original knobs..)
Replace them with 500K Analog taper pots and you will notice a difference. While your at it replace the caps with 0.22uf caps..
Ratfinks3
Username: Ratfinks3

Registered: 11-2004
Posted on Sunday, April 17, 2005 - 11:28 pm:   

Spiro, when the pots quit working they stopped slowly as if something was burning out. They were not scratchy and went from perfect to not working at all. All within about 60 seconds or so. Would you say it is most likely the caps? Thanks
Spiro
Username: Spiro

Registered: 02-2001
Posted on Monday, April 18, 2005 - 4:44 pm:   

hmmm sounds odd but I would start maybe with a cap replacement 0.022uf (I left out a zero in the above post) in a polyester cap will do the trick.. Or if you would like go for a ceramic disc cap.. they are only few cents each from an electronics shop.. I would still be replacing pots as well down the track.. Dont buy the caps from a guitar store they sell them for a few dollars each !!! and they are exactly the same thing..
Ratfinks3
Username: Ratfinks3

Registered: 11-2004
Posted on Wednesday, April 20, 2005 - 8:45 am:   

Ok What is the trick to getting the pots out of the F-holes? I thought about tying a thred on the post and dropping them into the body then out the f-hole? Any advise before I dig into this project?

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:




Thank you for supporting Ibanez Collectors Forum. Please help your favorite Ibanez guitar site as we endeavor to bring you the latest information about Ibanez custom vintage electric and acoustic guitars. Here you can discuss ibanez, guitars, ibanez guitars, basses, acoustics, acoustic, mandolins, electric guitar, electric bass, amplifiers, effect pedals, tuners, picks, pickups.